Wonderful Tips About How To Restore A Carbon Fiber Hood
![Faded Carbon Fiber Hood Repair Questions - Neons.org](http://i.imgur.com/tyfX0nD.jpg)
50/50 from up top of the vent:
How to restore a carbon fiber hood. I will update this will i. How do you fix dull carbon fiber? This is for people who have a the following:
There are no special tools, equipment, product, or training required for repairing or replacing of a carbon fiber component. How do you bring carbon fiber back to life? If the resin is poor quality it can oxidize and turn white like that.
It took me 6 hours to restore the. I was going to get rid of it. Try wet sanding it back with 2000 grit sand paper and polish.
Here's a before of the one side i'll be working on: When the whole part is sanded, wipe it clean with acetone and then rubbing alcohol. Bringing faded carbon fiber back to life usually.
Use a nice compound and finish it off with a carnauba wax to seal it and restore the shine. You wash them the same as you would paint, you. Use a rubbing compound (i have a turtle wax.
Carbon is laid up with epoxy resin. If any hazy spots remain, sand those areas. If it's not to oxidized then you can.
Put the oxidation remover on the hood and use the buffer to buff on it. I got a carbon fiber hood for my integra, around the edges are faded and a 1/4 inch crack in the middle. It will take a long time to buff it off, so be patient.
The part should look like satin carbon fiber. For the most part, you can and should care for your carbon fiber components no differently than you do your painted surfaces.